Electway Motors Co.,Limited
Tel: +8620-89560230
Fax: +8620-32037854
E-mail: steven@electway-motors.com
Detailed
This series motor used polygon structure so that the using rate of the stator’s inner space is vary high.The magnet yoke is laminated style,suitable for silicon controlled commutate power supply,and it can edure pulsating current and rapid change of current (load change).Magnetic poles are fixed by precise orientation.All the motors of system are with compensate winding,so the reverse performance is very well. The insulation class of the motor is F,using of reliable insulation structure and nonmenstruum vacuum pressure impregnated,guaranteeing the stable performance of insulation and good heat dissipation. |
|
|
Electrical machinery performance: |
|
|||||||||||||||||||||||||||||||||
1.Data listed in the technical data sheet should be employed under the following conditions:
b)First kind (B)motor can endure the overload(1min)according to table 4
c)The short time overload capacity seldom used means happens infrequency or only at the urgency,the motor working exceed the continuous rated overload capacity,we suggest you adjust the instantaneous open/close decice of the switch according to the short time overload capacity seldom using. |
Model explanation: |
|
|
Structure synopsis: |
|
|||||||||||||||||||||||||||||||||||||||||||||||
1.The methods and defend class of the motor
c)The cooling wind、wind pressure、cooling water flux、motor power see Table 2.
2.The installation and the type of motor according to the GB/T997 《The structure and installation type of rotating electrical machinery》, haveIM1001(horizontal borrom install、column uniaxia)and IM1002(horizontal bottom install、column biaxial). If the user needs other kinds of installation structure, it must be negotiated. |
Content: |
|
1.The motor type, power,voltage,running speed,excitation type,cooling style,number of output draft, position of outlet box, etc must be written when ordering. |